Noise Reduction Wars | Lightroom vs. Topaz DeNoise AI

Affiliate Disclosure: One of the ways I support this website is by partnering with awesome companies, whose products I use and love. These partnerships allow me to earn a small commission when you make a purchase through one of my affiliate links, but there is no additional cost for you. Your support is greatly appreciated!

Not long ago I captured this photograph of a Snowy Egret at Santee Lakes.

Snowy Egret at Santee Lakes

It was nearing dusk and the light was fading. I increased my ISO to 400 to get a bit more light into my camera so I could get the shot. My exposure was spot on, but because my camera body is a bit old, even a slight boost in ISO created noticeable noise.

Snowy Egret Zoomed In to show noise at ISO 400

There are several tools currently available to reduce image noise. The two that I use the most are Lightroom and Topaz DeNoise AI. Addressing image noise is a delicate balance between removing noise and maintaining sharpness.

Lightroom’s Noise Reduction

First, we’ll look at the results using Lightroom’s Noise Reduction and Sharpening and see how it performs.

Before and After Lightroom's Noise Reduction and Sharpening
Noise Reduction and Sharpening in Lightroom (before-left; after-right)
Noise Reduction and Sharpening Settings in Lightroom

If you look at the gray area around the Egret, the noise has been smoothed, but it was at the expense of losing detail in the feathers.

Topaz DeNoise AI

I wasn’t entirely happy with the results from Lightroom’s Noise Reduction – it swallowed up too much of the fine detail in the feathers. Let’s see if Topaz DeNoise AI can do better.

PRO TIP: When sending an image from Lightroom to Topaz DeNoise AI, make sure that all settings in Lightroom’s Detail Panel (Sharpening & Noise Reduction) are set to “0” prior to sending the image to Topaz DeNoise AI. Failing to do this will cause undesirable artifacts.

I opened my image in Topaz DeNoise AI using the Lightroom plugin and clicked Auto. About 95% of the time, the automatic setting does a stellar job, though there are times I need to fine tune the settings for the best result. However, this time, Auto did the trick.

Topaz DeNoise AI Screenshot

Let’s take a look at the before and after:

Before and after Topaz DeNoise AI's Noise Reduction
Topaz DeNoise AI (before-left; after-right)

As you can see, the noise is gone in the background, but the details in the the eyes, feathers, etc. are all preserved and perfectly sharpened.

Lightroom vs. Topaz DeNoise AI

Now that we’ve had a chance to look at each method individually, let’s compare the results from Lightroom and Topaz DeNoise AI.

The difference is clear (pun intended). The Lightroom noise reduction version muddles the detail whereas Topaz DeNoise AI managed to remove the unwanted noise AND sharpen the details at the same time.

Final Edit of the Snowy Egret at Santee Lakes
Final Edit

Noise Reduction Winner: Topaz DeNoise AI

Lightroom is a great tool and is capable of a heck of a lot…but in this case it is definitely not the best tool for the job. If you have an image where the detail is important (and seriously, when is it not?) I highly recommend running your image through Topaz DeNoise AI if you have unwanted grain.

>>CLICK HERE to add Topaz DeNoise AI to your workflow

If you’re ready to give Topaz DeNoise AI a try, make sure you use my link and enter my coupon code ANGANDRIEUX at checkout to save 15% on your purchase. Topaz also offers a free 30 day trial of all of their software if you prefer to give it a test drive before putting down your hard-earned cash.

Questions about Topaz DeNoise AI or Lightroom?

If you have any questions about the software mentioned in this article, please leave a comment below, or contact me directly. I’m always happy to help!

Angela Andrieux

📷 Photographer Prone to Wanderlust | Blogger | Photography Coach | 🍷 Foodie | 🐱 Cat Lover | ⚓️ Navy Wife

4 Comments

  1. Kevin La Rue on March 9, 2020 at 7:58 pm

    Angela – Have you done any cross-comparisons of the noise reduction in Luminar 4 (based on Skylum’s former dedicated tool Noiseless) and Topaz AI? Thanks!

    • Angela Andrieux on March 9, 2020 at 8:31 pm

      Hi Kevin – I contemplated putting it in this article (I have a version of this image done with Luminar as well), but Luminar sadly didn’t fare well in the comparison. For this one task, it is hard to beat the one click results from DeNoise AI. I loved Noiseless, but have never been able to get the same results with Luminar’s noise reduction.

  2. Alan on March 10, 2020 at 12:19 am

    In the Lightroom example you kept the Detail slider at 50. Would the results improve by telling the software that you wanted more details retained?

    • Angela Andrieux on March 10, 2020 at 9:30 am

      Hi Alan – I did try that, but by further increasing the Detail slider in Lightroom, it re-introduced the noise back into the flatter areas of the photograph. The settings I used were the best results I was able to get with that image. It is tough when you’re working with super-fine detail like feather.

Leave a Comment





This site uses Akismet to reduce spam. Learn how your comment data is processed.